2025

Aydin, A., Cetin, E., Erman, S. C., & Mumtaz, K. (2025). Laser powder bed fusion of Ti6Al4V using low-cost high efficiency 450 nm diode point melting. Journal of Materials Research and Technology, 34, 2814-2827.

Erman, S. C., Aydin, A., Groom, K., & Mumtaz, K. (2025). Diode area melting of SS316L using low power 450 nm lasers. The International Journal of Advanced Manufacturing Technology, 1-20.

(Early Access) Beronská N, Dvorák T, Özcanli M, Šišková A. O, Kováčik J, Opálek A, Yıldızhan Ş. Using biochar from kitchen bio-waste as a filler material in polymer matrix composite. Journal of Composite Materials. ;0(0). doi:10.1177/00219983251329509

Aktitiz, İ., Darıcık, F., Aydın, A., & Aydın, K. (2025). Experimental investigations on metallization in the surface modified additively manufactured plastic substrates using DC sputtering. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089241295942.

Aktitiz, İ., Darıcık, F., Aydın, A., & Aydın, K. (2025). Metallization of 3D Printed Polylactic Acid Polymer Structures via Radio-Frequency Sputtering. Journal of Materials Engineering and Performance, 1-15.

Tosun, E., Keyinci, S., Yakaryilmaz, A. C., & Ozcanli, M. (2025). A Study on the Removal of Heat Generated by a Lithium-Ion Battery Module: A Fan-Assisted Battery Cooling Approach. Processes, 13(3), 848.

Kumlu, U., Karacor, B., & Ozcanli, M. (2025). Effects of different production methods and hybridization on mechanical characteristics of basalt, flax, and jute fiber-reinforced composites. Materials Testing, 67(1), 111-124.

(Early Access)Karacor, B., & Ozcanli, M. The use of bioresin composites created with five different vegetable oils such as soybean oil, palm oil, rapeseed oil, cottonseed oil, linseed oil in the automotive industry. Polymer Composites.

(Early Access) Hukumdar, O., Kumlu, U., Keskin, A., & Akar, M. A. (2025). Effect of TMAB and ZrC concentration on mechanical and morphological properties of Ni–B/ZrC composite electrodeposition. Materials Testing, 67(1), 17-35.

(Early Access) Yıldızhan, S., Kumlu, U., Akar, M. A., Keskin, A., & Hukumdar, O. (2024). Numerical crashworthiness analysis of improved elliptical cross-section straight and tapered thin-walled crashing boxes. Mechanics Based Design of Structures and Machines, 1-18.

 

2024

Al Cheikh Mohamad Ahmad, M., Keskin, A., Özarslan, H., & Keskin, Z. (2024). Properties of ethyl alcohol-water mixtures as a reductant in a SCR system at low exhaust gas temperatures. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 46(1), 5584-5595.

Karaçor, B., Özcanlı, M., & Serin, H. (2024). The influence of hybridization and different manufacturing methods on the mechanical properties of the composites reinforced with basalt, jute, and flax fibers. Iranian Polymer Journal, 33(3), 289-304.

Şanlı, B., Güven, O., Özcanlı, M., & Uludamar, E. (2024). Determining the effect of tung biodiesel on thermodynamic, thermoeconomic, and exergoeconomic analyses at high engine speeds. Frontiers in Energy Research, 12, 1326466.

Keiyinci, S., Bas, O., & Atakan Akar, M. (2024). Investigation on flow characteristics of generic car body with different boundary conditions. Scientia Iranica, 31(13), 1077-1089.

 

2023

Sümer, Ş. U., Keiyinci, S., Keskin, A., Özarslan, H., & Keskin, Z. (2023). The effect of fusel oil as a reductant over the multi-metallic catalyst for selective catalytic reduction of NOx in diesel exhaust at low-temperature conditions. Petroleum Science and Technology, 41(20), 1901-1917.

Çalık, A., Tosun, E., Akar, M. A., & Özcanlı, M. (2023). Combined effects of hydrogen and TiO2 nanoparticle additive on terebinth oil biodiesel operated diesel engine. Science and Technology for Energy Transition, 78, 9.

Karaçor, B., Özcanlı, M., & Kumlu, U. (2023). Hybrid jute/carbon fiber composites: optimum post-curing time. Iranian Polymer Journal, 32(11), 1443-1454.

Korkut, V., Darıcık, F., Aktitiz, İ., & Aydın, K. (2023). Failure of surface modification 3D printed polymer materials by UV/ozone irradiation. Engineering Failure Analysis, 152, 107466.

Un, C., & Aydın, K. (2023). Modernization of Fire Vehicles with New Technologies and Chemicals. Vehicles, 5(2), 682-697.

Darıcık, F., Topcu, A., Aydın, K., & Çelik, S. (2023). Carbon nanotube (CNT) modified carbon fiber/epoxy composite plates for the PEM fuel cell bipolar plate application. international journal of hydrogen energy, 48(3), 1090-1106.

Arat, H. T., Sürer, M. G., Gökpinar, S., & Aydin, K. (2023). Conceptual design analysis for a lightweight aircraft with a fuel cell hybrid propulsion system. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 45(1), 46-60.

Akar, M. A., Kumlu, U., & Yıldızhan, Ş. (2023). Numerical investigation of crash behavior of vehicle side door beams under high-speed pole side impacts. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 237(14), 3408-3418.

Ozgur, T. (2023). A Study on the Performance and Emission Characteristics of a Diesel Engine Operated with Ternary Higher Alcohol Biofuel Blends. Ingeniería e Investigación, 43(3), 1.

 

2022

Karacor, B., & Ozcanli, M. (2022). Thermal and mechanical characteristic investigation of the hybridization of basalt fiber with aramid fiber and carbon fiber. Polymer Composites, 43(11), 8529-8544

Topcu, A., Aydın, K., & Çelik, S. (2022). The effect of the heater and the pump operation durations on the cold start performance of the coolant heating assisted PEM fuel cell application. International Journal of Energy Research, 46(15), 23939-23962

Aktitiz, İ., Aydın, K., Darıcık, F., & Topcu, A. (2022). Production of different metal oxide nanoparticle embedded polymer matrix composite structures by the additive manufacturing technology and investigation of their properties. Polymer Composites, 43(11), 7826-7835.

Serin, H., Güzel, G., Kumlu, U., & Akar, M. A. (2022, August). Potential of Using Agricultural Waste Composites as Thermal Insulation Material. In Macromolecular Symposia (Vol. 404, No. 1, p. 2100409).

Akar, M. A., Tosun, A. T., Yel, F., & Kumlu, U. (2022, August). The usage of natural fibers for automotive applications. In Macromolecular Symposia (Vol. 404, No. 1, p. 2100414).

Tosun, E., & Özcanlı, M. (2021). Hydrogen enrichment effects on performance and emission characteristics of a diesel engine operated with diesel-soybean biodiesel blends with nanoparticle addition. Engineering Science and Technology, an International Journal, 24(3), 648-654.

 

2021

Aktitiz, İ., Delibaş, H., Topcu, A., & Aydın, K. (2021). Morphological, mechanical, magnetic, and thermal properties of 3D printed functional polymeric structures modified with Fe2O3 nanoparticles. Polymer Composites, 42(12), 6839-6846.

Un, C., & Aydın, K. (2021). Thermal runaway and fire suppression applications for different types of lithium ion batteries. Vehicles, 3(3), 480-497.

Keiyinci, S., & Aydin, K. (2021). Ground simulation of fuel cell/battery hybrid propulsion system for small unmanned air vehicles. Aircraft Engineering and Aerospace Technology, 93(5), 783-793.

Keiyinci, S., & Aydin, K. (2021). Progress in carbon emission reduction technology in fossil fuel-based hydrogen production. Advances in environmental research, 10(2), 147-163.

Aktitiz, I., Aydın, K., & Topcu, A. (2021). Characterization of TiO2 nanoparticle–reinforced polymer nanocomposite materials printed by stereolithography method. Journal of Materials Engineering and Performance, 30(7), 4975-4980.

Un, C., Aydin, K., Garo, J., Condone, B., & Gentilleate, M. (2021). Experimental Study of Fire Suppression For Li-ion Electric Batteries With H2O. Fresenius Environmental Bulletin, 30(1).

Serin, H., & Yıldızhan, Ş. (2021). Tensile properties and cost-property efficiency analyses of expanded polystyrene/chopped glass fiber/epoxy novel composite. Journal of Mechanical Science and Technology, 35, 145-151.

Erkan, A., Tüccar, G., Tosun, E., & Özgür, T. (2021). Comparison of effects of nanofluid utilization (Al 2 O 3, SiO 2, TiO 2) with reference water in automotive radiators on exergetic properties of diesel engines. SN Applied Sciences, 3, 1-13.

Keskin, Z., Özgür, T., Özarslan, H., & Yakaryılmaz, A. C. (2021). Effects of hydrogen addition into liquefied petroleum gas reductant on the activity of Ag–Ti–Cu/Cordierite catalyst for selective catalytic reduction system. International Journal of Hydrogen Energy, 46(10), 7634-7641.

 

2020

Keskin, A., Yaşar, A., Candemir, O. C., & Özarslan, H. (2020). Influence of transition metal based SCR catalyst on the NOx emissions of diesel engine at low exhaust gas temperatures. Fuel, 273, 117785.

Resitoglu, I. A., Altinisik, K., Keskin, A., & Ocakoglu, K. (2020). The effects of Fe2O3 based DOC and SCR catalyst on the exhaust emissions of diesel engines. Fuel, 262, 116501.

Baş, O., Akar, M. A., Serin, H., Özcanlı, M., & Tosun, E. (2020). Variation of spark plug type and spark gap with hydrogen and methanol added gasoline fuel: Performance characteristics. International journal of hydrogen energy, 45(50), 26513-26521.

Sanli, B. G., Özcanli, M., & Serin, H. (2020). Assessment of thermodynamic performance of an IC engine using microalgae biodiesel at various ambient temperatures. Fuel, 277, 118108.

Tanç, B., Arat, H. T., Conker, Ç., Baltacioğlu, E., & Aydin, K. (2020). Energy distribution analyses of an additional traction battery on hydrogen fuel cell hybrid electric vehicle. International Journal of Hydrogen Energy, 45(49), 26344-26356.